RESEARCHER PROFILE
Д. В. Руцкий
← Back to Volgograd State Technical University
Д
Volgograd State Technical University
Д. В. Руцкий works in Metallurgical Processes and Thermodynamics, Solidification and crystal growth phenomena, High Temperature Alloys and Creep, Iron and Steelmaking Processes, Metallurgy and Material Forming. Recorded institutional associations include Volgograd State Technical University.
75Publications
89Citations
4H-index
Inclusion identifies researchers whose recorded research contributions may inform their university’s understanding of its research community. It does not rank individual research quality or establish current employment.
Selected research works
Up to 100 highly cited works; DOI links open the original research. Counts reflect the collected record, not real-time citation totals.
Increasing the structural strength of cast steel by powder modification
2010 · 7 citationsEffect of chilling of the top part of a steel ingot on the conditions of its crystallization and the quality of forgings obtained from it
2013 · 6 citationsAspects of the formation of sulfide inclusions and their effect on the quality of low-alloy structural steels
2011 · 5 citationsEffect of liquid–solid pouring on the as-cast structure and the distribution of nonmetallic inclusions in a 24.2-t steel 38KhN3MFA ingot
2017 · 5 citationsA Study of the Development of Chemical Heterogeneity in Large Forging Ingots: Depending Upon the Configuration and Thermophysical Conditions of Casting
2014 · 4 citationsFeatures of Structure and Solidification of Extended Double Ingots for Hollow Forgings. Part 1
2016 · 4 citationsInfluence of deoxidation on the location of sulfide inclusions in structural steels
2017 · 4 citationsInvestigation of the Influence of the Chemical Composition of Tubular Steels on the Features of the Formation of Phase Constituents during the Solidification of Continuously Cast Billets by Computer Simulation
2019 · 4 citationsOptimization of the Composition and Amount of Nonmetallic Inclusions in a Continuously Cast Billet Based on the Deoxidation of the Melt with Aluminum and Calcium Carbide
2019 · 4 citationsModeling the solidification process of a forging ingot when topping up the profitable part with a melt
2023 · 4 citationsStudy and optimization of the parameters of ingots for obtaining heavy rolled sections
2008 · 3 citationsThe Formation of Sulfide Inclusions and Their Location Within Grains in Relation to Steel 20 Deoxidation Conditions
2014 · 3 citationsStudy of Nonmetallic Inclusion Inhomogeneity and Distribution in a Steel 38KhN3MFA Ingot Cast with a Head Section Cooler
2015 · 3 citationsImproving chemical homogeneity and the stability of the mechanical characteristics in large products made for machine construction
2009 · 3 citationsChange in the surface oxide layer of piercing-mill mandrels over time
2016 · 3 citationsCast-structure defects in the axial zone of 38XH3MΦA steel ingots and their behavior in upsetting
2011 · 2 citationsMathematical modeling of the steel ingot teeming and the solidification process
2017 · 2 citationsContamination of the Metal of a Large Ingot by Oxide, Sulfide, and Oxysulfide Inclusions
2017 · 2 citationsStudy of the Hot Top Performance with Various Heat Insulators
2017 · 2 citationsApplication of physical simulation to evaluate the impact of teeming method and rate on axial zone formation of large ingots
2022 · 2 citationsPhysical modeling of the effect of refilling the melt into an ingot knock-off head on solidification and structure formation
2023 · 2 citationsINVESTIGATION OF THE INFLUENCE OF THE MELT CASTING SPEED AND METHOD ON THE DEVELOPMENT OF THE AXIAL ZONE IN MODEL INGOTS
2023 · 2 citationsFeatures of the distribution non-metallic inclusions in the structural zones of a 24.2 ton ingot of 38ХН3МФА steel
2016 · 1 citationsTHE EFFECT OF INGOT GEOMETRY AND INGOT TOP SOLIDIFICATION CONDITIONS ON SOLIDIFICATION AND THE DEVELOPMENT OF INTERNAL DEFECTS
2016 · 1 citationsModelling the behaviour of ingot axial defects under open die forging
2017 · 1 citations