RESEARCHER PROFILE

Stephen Rudin

← Back to University at Buffalo, State University of New York

S

University at Buffalo, State University of New York

Radiation Dose and ImagingDigital Radiography and Breast ImagingAdvanced X-ray and CT ImagingAdvanced Radiotherapy TechniquesMedical Imaging Techniques and Applications

Stephen Rudin works in Radiation Dose and Imaging, Digital Radiography and Breast Imaging, Advanced X-ray and CT Imaging, Advanced Radiotherapy Techniques, Medical Imaging Techniques and Applications. Recorded institutional associations include University at Buffalo, State University of New York.

495Publications
3,343Citations
28H-index

Inclusion identifies researchers whose recorded research contributions may inform their university’s understanding of its research community. It does not rank individual research quality or establish current employment.

Selected research works

Up to 100 highly cited works; DOI links open the original research. Counts reflect the collected record, not real-time citation totals.

  1. Challenges and limitations of patient-specific vascular phantom fabrication using 3D Polyjet printing

    2014 · 176 citations
  2. A Handbook of Radioactivity Measurements Procedures

    1979 · 98 citations
  3. Self‐calibration of a cone‐beam micro‐CT system

    2008 · 83 citations
  4. Generalizing the MTF and DQE to include x-ray scatter and focal spot unsharpness: Application to a new microangiographic system

    2005 · 82 citations
  5. Accurate characterization of image intensifier distortion

    1991 · 79 citations
  6. Primary stentriever versus combined stentriever plus aspiration thrombectomy approaches: in vitro stroke model comparison

    2014 · 77 citations
  7. 3D printed abdominal aortic aneurysm phantom for image guided surgical planning with a patient specific fenestrated endovascular graft system

    2017 · 70 citations
  8. Region of interest (ROI) computed tomography

    2004 · 67 citations
  9. Endovascular image‐guided interventions (EIGIs)

    2007 · 61 citations
  10. Treatment planning for image-guided neuro-vascular interventions using patient-specific 3D printed phantoms

    2015 · 59 citations
  11. Verification of the performance accuracy of a real-time skin-dose tracking system for interventional fluoroscopic procedures

    2011 · 58 citations
  12. Region of interest fluoroscopy

    1992 · 54 citations
  13. A tracking system to calculate patient skin dose in real‐time during neurointerventional procedures using a biplane x‐ray imaging system

    2016 · 49 citations
  14. Micro‐angiography for neuro‐vascular imaging. II. Cascade model analysis

    2003 · 46 citations
  15. The Asymmetric Vascular Stent

    2009 · 43 citations
  16. Measurement of Flow Modification in Phantom Aneurysm Model: Comparison of Coils and a Longitudinally and Axially Asymmetric Stent—Initial Findings

    2004 · 41 citations
  17. 3D printed cardiac phantom for procedural planning of a transcatheter native mitral valve replacement

    2016 · 41 citations
  18. Region of interest (ROI) computed tomography (CT): comparison with full field of view (FFOV) and truncated CT for a human head phantom

    2005 · 39 citations
  19. Accurate MTF measurement in digital radiography using noise response

    2010 · 37 citations
  20. Super‐global distortion correction for a rotational C‐arm x‐ray image intensifier

    1999 · 36 citations
  21. Particle image velocimetry (PIV) evaluation of flow modification in aneurysm phantoms using asymmetric stents

    2004 · 35 citations
  22. Design optimization for accurate flow simulations in 3D printed vascular phantoms derived from computed tomography angiography

    2017 · 35 citations
  23. Cone-Beam Micro-CT System Based on LabVIEW Software

    2007 · 34 citations
  24. Asymmetric Vascular Stent

    2008 · 33 citations
  25. Effect of injection technique on temporal parametric imaging derived from digital subtraction angiography in patient specific phantoms

    2014 · 32 citations

← Return to the university profile